BaseType_t xTimerReset( TimerHandle_t xTimer,
TickType_t xBlockTime );
Software timer functionality is provided by a timer service/daemon task. Many of the
public FreeRTOS timer API functions send commands to the timer service task
through a queue called the timer command queue. The timer command queue is
private to the RTOS kernel itself and is not directly accessible to application
code. The length of the timer command queue is set by the
configTIMER_QUEUE_LENGTH configuration constant.
xTimerReset() re-starts a timer that was previously created using the
xTimerCreate() API function.
If the timer had already been started and was
already in the active state, then xTimerReset() will cause the timer to
re-evaluate its expiry time so that it is relative to when xTimerReset() was
called. If the timer was in the dormant state then xTimerReset() has
equivalent functionality to the xTimerStart()
Resetting a timer ensures the timer is in the active state. If the timer
is not stopped, deleted, or reset in the mean time, the callback function
associated with the timer will get called 'n' ticks after xTimerReset() was
called, where 'n' is the timers defined period.
It is valid to call xTimerReset() before the RTOS scheduler has been started, but
when this is done the timer will not actually start until the RTOS scheduler is
started, and the timers expiry time will be relative to when the RTOS scheduler is
started, not relative to when xTimerReset() was called.
The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()
to be available.
The handle of the timer being reset/started/restarted.
Specifies the time, in ticks, that the calling task should
be held in the Blocked state to wait for the reset command to be successfully
sent to the timer command queue, should the queue already be full when
xTimerReset() was called. xBlockTime is ignored if xTimerReset() is called
before the RTOS scheduler is started.
pdFAIL will be returned if the reset command could not be
sent to the timer command queue even after xBlockTime ticks had passed.
pdPASS will be returned if the command was successfully sent to the timer
command queue. When the command is actually processed will depend on the priority of the
timer service/daemon task relative to other tasks in the system, although the
timers expiry time is relative to when xTimerReset() is actually called. The
timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
/* When a key is pressed, an LCD back-light is switched on. If 5 seconds pass
without a key being pressed, then the LCD back-light is switched off. In
this case, the timer is a one-shot timer. */
TimerHandle_t xBacklightTimer = NULL;
/* The callback function assigned to the one-shot timer. In this case the
parameter is not used. */
void vBacklightTimerCallback( TimerHandle_t pxTimer )
/* The timer expired, therefore 5 seconds must have passed since a key
was pressed. Switch off the LCD back-light. */
vSetBacklightState( BACKLIGHT_OFF );
/* The key press event handler. */
void vKeyPressEventHandler( char cKey )
/* Ensure the LCD back-light is on, then reset the timer that is
responsible for turning the back-light off after 5 seconds of
key inactivity. Wait 10 ticks for the command to be successfully sent
if it cannot be sent immediately. */
vSetBacklightState( BACKLIGHT_ON );
if( xTimerReset( xBacklightTimer, 10 ) != pdPASS )
/* The reset command was not executed successfully. Take appropriate
action here. */
/* Perform the rest of the key processing here. */
void main( void )
/* Create then start the one-shot timer that is responsible for turning
the back-light off if no keys are pressed within a 5 second period. */
xBacklightTimer = xTimerCreate
/* Just a text name, not used by the RTOS kernel. */
/* The timer period in ticks. */
( 5000 / portTICK_PERIOD_MS),
/* The timer is a one-shot timer. */
/* The id is not used by the callback so can take any
/* The callback function that switches the LCD back-light
if( xBacklightTimer == NULL )
/* The timer was not created. */
/* Start the timer. No block time is specified, and even if one was
it would be ignored because the RTOS scheduler has not yet been
if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )
/* The timer could not be set into the Active state. */
Create tasks here.
/* Starting the RTOS scheduler will start the timer running as it has
already been set into the active state. */
/* Should not reach here. */
for( ;; );
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.