FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [April 2008 Threads] Embest Flash ProgrammerPosted by Andrew Kistler on April 23, 2008 I have an Embest ATEB40X board. The same board that was used in the tutorial at the following URI.
http://www.freertos.org/portat91fr40008.html
The board came with a piece of software called, Embest Flash Programmer, as the tutorial says. When I execute the software all of the features that might make it useful (Program, Verify, Checksum, Protect, Upload) are grayed-out. After some investigation it seems like Embest wants me to register to use it for a price that cost more than the board.
Does anyone know if there is some trick (that is free) to make the software work? Can anyone recommend other software? It would be cheaper to buy a different dev-board, that was supported by free tools, than to register (and pay for) the Embest software... .
RE: Embest Flash ProgrammerPosted by woops_ on April 24, 2008 Look for SAM-BA and SAM-PROG on the Atmel WEB site. Free software to program AT91.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|