|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
Eclipse debug error LM3SXXXPosted by OCCAM on August 7, 2011 I think I've configured Eclipse Indigo properly I can edit, compile and program the MCU on the LM3S6965 evaluation board. Verified by making a code change that is reflected on the display. I can't seem to get debugging working. Open OCD seems to be running Info: openocd.c:92 main(): Open On-Chip Debugger (2007-08-17 11:00 CEST) When I initiate debug session I get Error while launching command: gdb --version What's wrong? RE: Eclipse debug error LM3SXXXPosted by sven-de on August 8, 2011 Have you installed GDB? If you have, then try connecting to your target via the GDBs telnet interface. This usually offers better indication of what's wrong. RE: Eclipse debug error LM3SXXXPosted by OCCAM on August 8, 2011 Yes GDB is installed ... I'll have look at the telnet interface .. .thanks RE: Eclipse debug error LM3SXXXPosted by OCCAM on August 9, 2011 OK ... one more step up the learning curve .... GDB is not GDB.exe when using Code Sorcery Lite, it's "arm-none-eabi-gdb.exe" So Now the debugger runs, but will not stop at break points .... I get little yellow "yield" signs at the breakpoint. Sheesh ... what a pain in the arse!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
