FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [December 2005 Threads] Keil port on ADUC7026Posted by Nobody/Anonymous on December 16, 2005 Hello, I have a problem when starting the General purpose timer (1) on my ADUC7026, on which i ported FreeRtos.
Timer 1 Interrupt service routine are not executed when i am in supervisor mode. The controller even not enter in the IRQ_Handler routine. But all thing work well when l work in user mode. Can you have any explication for that problem? How can l enter in supervisor mode in C code ?
Please help me. Best regards. Emeric
RE: Keil port on ADUC7026Posted by Nobody/Anonymous on December 16, 2005 Tasks run in System mode which is expected by the tick ISR. The tick being in IRQ and manual context switches being in Supervisor mode. Not sure what would happen if you manually switched to Supervisor mode. Most likely would not work.
Supervisor mode has its own status register - so most likely you will find that interrupts are disabled in supervisor mode status register.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|