|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
Problem with Codevision AVR,Posted by jediel on December 27, 2011 how to change atmega128 in port.c /* Hardware constants for Timer1. */ #if (defined _CHIP_ATMEGA128_) | (defined _CHIP_ATMEGA64_) /* ATmega64, ATmega128 chips, Timer 1 runs in Mode 4 */ #define portCLEAR_COUNTER_ON_MATCH ( ( unsigned portCHAR ) 0x08 ) // WGM13=0 WGM12=1 #define portPRESCALE_64( ( unsigned portCHAR ) 0x03 ) #define portCLOCK_PRESCALER ( ( unsigned portLONG ) 64 ) #define portCOMPARE_MATCH_A_INTERRUPT_ENABLE ( ( unsigned portCHAR ) 0x10 ) #else #error please modify Timer1 hardware constants to suit your chip #endif with atmega2560, please? RE: Problem with Codevision AVR,Posted by MEdwards on December 27, 2011 I don't think there is an official Codevision port for the AVR, but I guess it will be the same no matter what compiler is used. Do any of the ports here help? http://interactive.freertos.org/entries/20782373-freertos-winavr-port-for-atmega128-atmega1284p-at90can128-atmega169-atmega16 You can also ask on avrfreaks.net RE: Problem with Codevision AVR,Posted by jediel on December 28, 2011 oh i see, but not understand with winavr, thanks,
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
