FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2006 Threads] port st ARM7 with ride - answerPosted by Nobody/Anonymous on February 22, 2006 here is the code of the task :
static void Task_wake_up(void *p) { const portTickType xDelayPeriod =20; portTickType xLastWakeTime;
xLastWakeTime=xTaskGetTickCount();
for(;;) { GPIO_BitWrite(GPIO1,8,~GPIO_BitRead(GPIO1,8)); vTaskDelayUntil(&xLastWakeTime,xDelayPeriod ); }
}
We have a RAISONNANCE evaluation board which is using RIDE development. In IAR how to use ARM code for the task? Only to change the portINITIAL_SPSR is enough?
thanks
RE: port st ARM7 with ride - answerPosted by Nobody/Anonymous on February 22, 2006 The GCC LPC2106 and the Keil LPC demos can be built for both ARM and THUMB. If you look at the batch files ROM_THUMB.bat and ROM_ARM.bat in the GCC LPC directory you will see what it does to switch between the two.
I think also if you search this forum you will find other information on this.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|