FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2014 Threads] MPLabX2.0 tons of errors, but still compiles and runsPosted by roujesky on February 20, 2014 New to MPLabX, but use FreeRTOS alot.... Sounds like a MPLabX problem, but I think folks here could shed light on my problem easier than Microchip :)
I get a lot of errors/warnings
"Cannot find include file FreeRTOS.h"
"Cannot find include file task.h"
yet compiles and runs just fine. Can someone shed light on this annoyance?
thanks so much!
MPLabX2.0 tons of errors, but still compiles and runsPosted by rtel on February 20, 2014 Well if it compiles it must be able to find them when it needs to, so I'm afraid I have no idea as it is not something I have seen myself.
When do the errors show up? When you open the project, or when you build the project. If when you build the project then are they all shown before the compiler starts compiling or while it is compiling?
I have seen similar things with other systems where a dependency scanner which is either part of the compiler passes (unlikely in this case as it is GCC) or part of the editor (as it tries to find references to words it finds in the C files) goes a bit weird, but it does not effect the compiler itself.
Regards.
MPLabX2.0 tons of errors, but still compiles and runsPosted by roujesky on February 20, 2014 the errors/warnings show up in the IDE as red circle with an exclamation mark in the middle. I attached a screenshot of the IDE.
thanks!!!
AttachmentsRTOSError.jpg (325298 bytes)
MPLabX2.0 tons of errors, but still compiles and runsPosted by edwards3 on February 20, 2014 If this is anything like Eclipse then the IDE is trying to parse the code in a dumb way and coming up with phoney errors. In Eclipse it can be turned off, don't know about MPLAB though.
MPLabX2.0 tons of errors, but still compiles and runsPosted by roujesky on February 24, 2014 Does anyone know how to make MPLabX not so sensitive to these warnings/errors?
thanks!
MPLabX2.0 tons of errors, but still compiles and runsPosted by rtel on February 25, 2014 You are more likely to get an answer to that on a Microchip forum.
Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|