FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2006 Threads] AT91SAM7S64-IAR port + GNU ARMPosted by Diego Essaya on January 28, 2006 Hi, all!
I'm starting a new project based on an AT91SAM7S256 microcontroller. I would like to use FreeRTOS, but I see that the port based on AT91SAM7S64-IAR is to be compiled using the IAR development tools. Will it be too difficult to compile the supplied demo using GNU ARM instead? Has anyone done this before?
Thanks in advance,
Diego
RE: AT91SAM7S64-IAR port + GNU ARMPosted by Nobody/Anonymous on January 28, 2006 Take a look at the lwIP demo page, near the bottom there is some info on building it with GCC. It is a SAM7X rather than SAM7S, but just change the headers.
I think there may be other GCC ports about also.
RE: AT91SAM7S64-IAR port + GNU ARMPosted by daveyjcrocket on January 29, 2006 I'm using the 256 part with iar's(segger) jlink usb download cable and gnuarm's tools. The gnuarm yahoo group may be of use. There is a jlinkserver in the files section, for use with segger's cable to download via jtag port. It doesn't work with 256k part because the page size is for 64k part. Let me know if you want the app with corret page siz support.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|