|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
PIC18F8680 portPosted by Nobody/Anonymous on July 2, 2005 I used freertos v3.00 in my design which have a microcontroller PIC18F8680.when i start two task and have not same priority, but i find that is only one task can be run. The variable PREEMPTIVE is alreay be set to 1.but it is running correct in MPLAB SIM. what's happen! RE: PIC18F8680 portPosted by Richard on July 2, 2005 Difficult to say without knowing what you have done. If MPLAB can simulate the PIC18F8680 then I can take a look for you. Can you send me your project in a zip file? Make sure you send the source and build files, and try to make the project the smallest and simplest possible that exhibits the problem. You can send to me at the email address listed on the contact page of the WEB site ( r dot barry at free ...... ). upgrade mcc18 v2.43 to 2.44, bug is found.Posted by Nobody/Anonymous on July 4, 2005 I used mcc18 v2.43 compiled my project, the result is correct, but when i upgrade v2.43 to v2.44, the result is mistake. when I trace into task call, i found all parameter equal to 0 which be transmited to function call. i think that is compiler bug, but i can't fix it. what can i do to fix this bug? someone can help me?
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
