FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [July 2009 Threads] HCS12 and HCS12X unsupported portPosted by Eduardo Goncalves on July 14, 2009 I found on the unsupported ports a port for the HCS12 and HCS12X using CodeWarrior made by Ole Asbjørn Fadum. File: HCS12_HCS12X_CodeWarrior_OAF.zip
Is it possible to know if this port would run in the Freescale mc9s12xet256?
thanks
RE: HCS12 and HCS12X unsupported portPosted by Dave on July 15, 2009 No idea, but if the CPU core is the same then there is no reason why not, once the linker scripts have been adjusted.
RE: HCS12 and HCS12X unsupported portPosted by Stella B R on July 18, 2009 Hi everyone....
I have have downloaded the latest version of FreeRTOS. i wanted to port it to HCS12X controller. I found on the unsupported ports a port for the HCS12X using CodeWarrior made tried to unzip that file. It asks for some password.hence i am unable to use that port....anyone knows about the password or is there any other way to use this HCs12X port.
RE: HCS12 and HCS12X unsupported portPosted by Richard on July 18, 2009 I just tried opening the .zip file HCS12_HCS12X_CodeWarrior_OAF.zip from the FreeRTOS/Demo/Unsupported folder, and was not asked for a password. Is this the file you are using?
Regards
RE: HCS12 and HCS12X unsupported portPosted by Stella B R on July 18, 2009 Hi Richard, Thanks for replying. Yes i am using the same zip file. The FreeRTOS version i am using is FreeRTOSV5.4.0. Can u please tell me how did u unzip it. and which is the Codewarrior version u are using because if i skip the password and unzip the file. I gat a partially unzipped folder. And when i later open the project under CodeWarrior V4.6, it says project cannot be opened.
RE: HCS12 and HCS12X unsupported portPosted by Richard on July 18, 2009 Seems to open ok in CodeWarrior for Microcontrollers V6.2 - doesn't seem to build though.
Regards.
RE: HCS12 and HCS12X unsupported portPosted by Stella B R on August 8, 2009 Hi everyone,
I tried to use the Freertos unsupported port for HCS12X. but i was not able to Make the project. Has anyone worked in this regard?
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|