FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2006 Threads] I2C: Differences LPC210x - AT91SAM7S (ISR)Posted by Thomas on March 21, 2006 Hello,
I´m currently trying to implement the WIZnet I2C TCP/IP Demo into my project with an AT91SAM7S (Rowley GCC). The WIZNet Demo uses a Philips LPC210x. In i2c.c it simply starts the I2C communication with setting the start condition: I2C_I2CONCLR = i2cSI_BIT; I2C_I2CONSET = i2cSTA_BIT; then waits for an IRQ and goes on in the ISR in i2cISR.c.
Therefore its necessary that on every I2C state change occurs an IRQ. The LPC does it(?). When my Atmel datasheet informs my correctly the AT91SAM7S isn´t able to do this.
So I have to implement nearly the whole Write/Read procedure in i2c.c ??? (I think I can only get an IRQ after transmit has finished ?)
Has anybody else done this with an Atmel?
Thomas
RE: I2C: Differences LPC210x - AT91SAM7S (ISR)Posted by Nobody/Anonymous on March 21, 2006 I think the interrupts only fire after each byte. The isr then just copies the next byte.
Also on the Atmel I think it can be simpler through the use of the dma to pass data straight to the i2c peripheral without software intervention at all.
Do the Rowley GCC tools have any i2c examples for atmel?
RE: I2C: Differences LPC210x - AT91SAM7SPosted by Thomas on March 21, 2006 Hello,
thanks for the answer!
At AT91.com I read the Atmels TWI does not have a PDC, so I have to do it manually or with IRQs.
I found no example using TWI with the AIC, so if anybody has done this before...
Thomas
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|