FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2007 Threads] uIP and STR912x err: check status flags 0x10Posted by josh r on May 14, 2007 I am trying to run the STR912x uIP demo on the STR910-EVAL board. It seems that I am never able to get past the ComPort initialization/test tasks. I get the error: "check status flags 0x10".
On UART2 the alphabet is transmitted in an infinite loop. What must I do to proceed?
Thanks, Josh
RE: uIP and STR912x err: check status flags 0x10Posted by Nobody/Anonymous on May 14, 2007 Unless there is anything different to the STR9 demos to any of the other demos, I would guess that you need a loop back connector on the com port. A paper clip usually does the trick. Just connect pins 2 and 3 together.
I also suggest you read the documentation page for the STR9 on the FreeRTOS WEB site.
RE: uIP and STR912x err: check status flags 0Posted by josh r on May 14, 2007 :)... oops.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|