FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2010 Threads] FreeRTOS on STR71x + GCCPosted by Marchaudon Romain on May 11, 2010 Hello everyone,
I'm currently working on a project that needs FreeRTOS. This is the first time I'm using FreeRTOS (and even an OS) on my µC.
I would like to get/make a version working with GCC. I have tried to use IAR but my Jtag cable is not recognized and the additional source code I have to use with FreeRTOS is in C++ and IAR is not good with C and C++ in the same time.
I was looking into other project with GCC (specialy the ARM7_AT91FR40008_GCC) and I have noticed that I haven't the same files for my STR71x. Can anyone explain to me how to change the makefile in order to get it work? Will I have to change some of my existing files in order to adapt it to the OS?
Thanks a lot for your answers, I hope I'm not the onlyone trying to use GCC with a STR71x.
Romain
RE: FreeRTOS on STR71x + GCCPosted by Dave on May 12, 2010 Can you use the files from the FreeRTOS\Source\portable\GCC\STR75x directory? Just check the timer set up is compatible with you uC.
RE: FreeRTOS on STR71x + GCCPosted by Marchaudon Romain on May 12, 2010 I don't need to use those files as there is allready a directory for STR71x in GCC (FreeRTOS\Source\portable\GCC\STR71x) But there is some difference in those 2 directories ... I would like, to begin, just to be able to compile FreeRTOS itself (without any demo) and after just add my tasks...
So far I have a list of c file for FreeRTOS, I hope I haven't missed any of them: LibSource : 71xlib.c | gpio.c | rccu.c | uart.c | wdg.c RTOS Source : list.c | port.c | portasm.s79 | queue.c | tasks.c System Files: 71x_init.c | 71x_it.c | 71x_vect.s
So know, I'd like to get a working makefile, using gcc (arm-elf-gcc) ... And for the moment I have the impression I'm in a dead-end. Any idea/help for me? (even better, a working makefile if it's possible ;) )
Thanks a lot, Romain
RE: FreeRTOS on STR71x + GCCPosted by Dave on May 12, 2010 As far as I can tell there is no gcc\str71x directory in the official release so I don't know where that came from. Also if you are using gcc I don't know why you would have an portasm.s79 file (which is presumable an IAR file).
RE: FreeRTOS on STR71x + GCCPosted by Marchaudon Romain on May 12, 2010 Yes, you're rigt, it was a directory I have created ... My mistake, I'm doing so much things I had forgotten :(
I was wondering what was the purpose/interest of the portasm.s79 file actually, so if it's a IAR file I'll remove from my RTOS sources!
So now I have to figure how write my makefile ... And this is a big work :S I have no idea to begin with :(
And I should transform some files I guess, even to write somme new one ... So much to do for such a litle thing :(
RE: FreeRTOS on STR71x + GCCPosted by Marchaudon Romain on May 20, 2010 No one is able to help me on this? It would be very usefull for me as I don't know how to begin with it :(
RE: FreeRTOS on STR71x + GCCPosted by Rohit Grover on May 23, 2010 Perhaps you can begin with http://www.gnu.org/software/make/manual/make.html
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|