FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2010 Threads] <terminated> OpenOCD ProgrammerPosted by Patrik Nylund on May 4, 2010 Hi
I have installed Eclipse 3.5(Galileo) C++, I have installed FreeRTOS 6.0.4 to C:/FreeRTOS, I have installed Debugger and CodeSourcery G++. I have a LM3S8962 Luminary evo board. I get the demo project compile. But I can't get the binary programmed to my evaluation board.
The only output I get from eclipse is OpenOCD Programmer [Program] C:\FreeRTOS\Demo\common\Drivers\OpenOCD\OpenOCD_ftdi.ex
what is wrong? thanks in advance Patrik
RE: <terminated> OpenOCD ProgrammerPosted by Patrik Nylund on May 4, 2010 Forgot to say, also installed drivers for the board. Misspelled OpenOCD_ftdi.exe
RE: <terminated> OpenOCD ProgrammerPosted by Dave on May 4, 2010 A couple of hints. First, there is an OpenOCD specific forum on the sparkfun.com web site that might be more targeted than this forum. Second, try using OpenOCD from the command line before integrating it with Eclipse. You can then telnet into OpenOCD and run each command separately to get a lot more feedback regarding what it is doing, what is working and what is not working. When you use it from eclipse the commands are executed one after the other automatically from the script.
RE: <terminated> OpenOCD ProgrammerPosted by Patrik Nylund on May 5, 2010 Hi
Thank you for your answer. I located the problem, and it was missing a cygwin1.dll file. So I installed cywin on my computer and copy the dll file to OpenOCD_ftdi.exe folder.
best regards, Patrik
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|