FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [November 2009 Threads] Support for Luminary microsPosted by ARMinator on November 6, 2009 Hi,
I have been running FreeRTOS on NXP's ARMs for a couple of years and for several reasons I'm now considering switching to Luminary micros.
This may not be the best forum to ask, but I though this forum hosts quite a bit of knowledge regarding Luminary microcontrollers.
By any chances, are they out there free C/C++ compilers for Luminary MCUs? If so, do they have any limitations?
Thanks!
RE: Support for Luminary microsPosted by Samuel Tardieu on November 6, 2009 As far as I can tell, Luminary microcontrollers are Cortex-M3 based, and should be fully supported by recent GCC versions.
You can obtain an installable package of GCC configured as an ARM cross-compiler from CodeSourcery web site (or you can build one from sources yourself).
RE: Support for Luminary microsPosted by psilva on November 9, 2009 Hi,
I work with LM3S6965 a cortex-M3, and arm-none-eabi-gcc version 4.3.2, this is the gcc from Codesourcey, openocd to write flash and to debug,jtag from olimex, and freeRtos as my RTOS.
Hope this help.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|