FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2009 Threads] TCP/IP issue on STR912Posted by Rickey Leung on September 7, 2009 I am using uIP on STR912, connected with a PC/104AB control board. there are 4 motor encoders data-in from PC/104AB to the main board. I use the TCP/IP protocol to get the Encoder values from the data bus, but I encounter the problem: The Encoder reading task runs every 10ms, it returns correct value while the motor is running. The TCP/IP task starts every 0.5 sec. once the task starts, the value from Encoder is boomed to an abnormal one. Anyone here met this problem before?
Thanks,
Rickey
RE: TCP/IP issue on STR912Posted by Dave on September 7, 2009 As you are the only person with your application it is not likely that anybody else with of seen it behave like that.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|